Power Solutions for Aero Needs
Made in AmericaHigh-performance mobile energy systems engineered to keep aircraft, drones, and mission-critical equipment operating wherever the mission takes you.
Musubi Technology develops rugged, high-output portable power systems for aviation, unmanned aircraft, commercial operations, and remote deployments.
01 / The Problem
Aircraft and UAV operations don’t always happen where infrastructure does. Remote ramps lack ground power, so operators end up dependent on towed generators, fuel runs, long extension runs, and slow recharging cycles. Every one of those is time the aircraft isn’t flying.
Musubi Technology brings the power to the aircraft. Stored, high-current energy you roll to the tail, the flightline, or the staging area, and put to work in seconds.
Remote operations shouldn’t mean slower operations.
02Product Line
A lithium ground power unit built to start turbine and piston aircraft and sustain maintenance loads on the ramp, with no generator and no cord run.
A 36 kWh deployable energy platform for high-speed charging of unmanned aircraft and other high-power field systems, wherever the mission sets up.
03 / Ramp28
Ramp28 delivers 28V external ground power for turbine and piston aircraft. It is suited to Citation, King Air, Pilatus PC-12, TBM, Piper Meridian, and similar 28VDC aircraft, supporting everything from overnight maintenance to full engine start, without a ground power cart or shore power.
Download Ramp28 spec sheet| Aircraft Output | 28VDC |
|---|---|
| Continuous Current | 200A |
| 30-Second Output | 400A |
| 10-Second Starting Output | 1,450A |
| Battery Capacity | 17.7 kWh |
| Battery Chemistry | LiFePO₄ |
| Battery Configuration | 25.6V / 690Ah |
04Rugged Design
IP65 battery and power-distribution enclosures built for ramp and field environments.
Long-cycle-life, high-current lithium chemistry engineered for heavy starting duty.
Safe shutdown control for immediate power cut during ground operation.
Voltage, current, SOC, and SOH display for full visibility of system state.
2,000W pure-sine inverter with outdoor 120VAC receptacle for tools and support gear.
05 / FieldPowerUnit
FieldPowerUnit is a 36 kWh mobile energy platform engineered for high-speed charging of unmanned aircraft and other high-power field systems. Its variable-voltage architecture supports multiple battery and aircraft platforms, with up to 600 amps of charging current.
Operational Cycle
06Applications
High-speed battery charging for unmanned aircraft systems at forward and austere operating locations.
Fast turnaround between flights for inspection, survey, and mapping fleets far from fixed charging infrastructure.
Reliable field power for drone inspection of bridges, towers, lines, and other critical assets.
Sustained energy for sensor-heavy mapping missions where every cycle of downtime costs coverage.
Deployable stored power for response teams operating before local infrastructure is restored.
Mobile energy support for field teams, staging areas, and supply points off the grid.
07 / Technology
Power stages sized for true aircraft starting loads and high-speed UAV battery charging, not adapted consumer hardware.
LiFePO₄ energy modules configured for each platform’s voltage, capacity, and duty cycle requirements.
Integrated monitoring of voltage, current, SOC, and SOH so operators always know system state before the next start or charge.
IP65 enclosures and field-ready construction designed to live on the ramp, in the truck, and at remote staging areas.
Outputs engineered around the aircraft and UAV platforms you actually operate, with custom configurations supported.
08 / Custom Engineering
Beyond the standard Ramp28 and FieldPowerUnit platforms, we engineer custom power solutions around your airframe, voltage, and duty cycle.
Contact / Musubi Technology
Whether you’re starting turbine aircraft on the ramp or recharging UAVs miles from the nearest infrastructure, we can size a power system around your operation.